First page of the Marples archive.

My Honing Guides

Posted by is9582 on December 26, 2015 with No Commentsas , , , , , , , , , ,

I thought I’d supplement my last blog with just a bit more info, relating to the honing guides I currently own. I’ve had a range over the years, and those in the photo below, are a fair representation of those.

 

All of my current guides.

All of my current guides.

 

In the photo, the guide listed as

1. This guide is by Veritas, and was their first version, as far as I know. This one holds the tool via downward pressure, via a large screw and a disc that touches the top surface of said tool. I struggled getting tools perfectly square, but the newer version 2.0 (I believe this is correct) has attachments that aide in this and accurate setting of angles.

2. This guide is the Sharp Skate which has the bronze unit that holds the blades (with the pins removed, the far top on each end, the internal mechanism can be skewed to set positions with pin-holes or possibly in between). It also comes with the black “tray” on which it sits, with lines the blade can engage, to set the angle precisely. The bottom has wheels that run laterally, which is how this guide (and the tool it holds) is moved. This can hold the larger irons for Japanese hand planes, as well as Western tools.

3. This guide is an older Eclipse style made by Record/Marples, and as you can see, it has thicker castings in areas, and a finger-friendly nurled cap to tighten the guide.

4. This is a very recent Eclipse style, replacing my old worn unit.

5. This is the old worn unit (with the rusty wheel).

6. This one is the Kell honing guide (they now have another version that has wheels with a larger diameter, which can also be had as replacements that fit on the earlier units), which has two clear-plastic discs, that make contact with the side of the tool, rather than galling the inside bronze surface of each wheel. There is another version, that does not handle as wide of irons or chisels, but each are easy to use.

There are a range of honing guides on the market, and one that I have on my hit list, made by Lie-Nielsen. Their new guide is made with precision that is not unlike their planes, and there are a number of different jaws for the guide, depending on the tool which you are sharpening/honing. They even have jaws for their skew block plane irons, both left and right available skewed 18-degrees, as well as a 30-degree skewed version for the side rabbit plane irons, and others. This looks to be THE honing guide! Thomas Lie-Nielsen does advise that he doesn’t guarantee it to work with all irons/blades/chisels, as it was made to work with Lie-Nielsen products, but it should work for a wide range of sharpening

I hope this might give a little more insight into some of the honing guides on the market, and even a few from the past. Thanks for stopping by to check out the info, and let me know if you have any questions or comments.

Lee Laird