Page 2 of the Wood archive.

Winding Sticks – alternate use

Posted by is9582 on February 19, 2016 with No Commentsas , , , , , , , , ,

I’ve been doing a lot of hand planing lately, with a good portion of that in the “flattening” mode, as opposed to a more general “smoothing” mode. While I was working today, I was checking my progress with a pair of Winding Sticks, and as I used them I wondered if others do the same […]

Measured and was 1/4″ off

Posted by is9582 on February 12, 2016 with No Commentsas , , , , , , , , , ,

Before I get started on the main topic, I wanted to pass along that I am now on Instagram as LeeLairdWoodworking as well as Twitter as @LeeLairdWW, in case anyone didn’t know. It’s been a bit since I had time to write a proper article, so if you’d like, you can see what I’m up […]

Pony gets leather

Posted by is9582 on January 13, 2016 with No Commentsas , , , ,

I finally found the time to apply some leather to the heads of my Stitching Pony. I was originally planning to use some of the thicker leather I knew I had on hand, but ran across some that was at least twice, and probably closer to 4 times more thin. I first measured out my […]

Pony build progress

Posted by is9582 on January 7, 2016 with No Commentsas , , , , , , , , , , , , ,

I just re-read the title of this post, and it sounds like I should be a mad scientist holed up in some distant castle, making lots of muhwahahaha types of evil laughter. Ok, so the last part may be somewhat true, but I digress. After the glue dried, attaching the oak blocks to each leg, I […]

Workbench top progress

Posted by is9582 on December 18, 2015 with No Commentsas , , , , , , , , , , ,

I was planning to plane the larger 6’+ sections of the Soft Maple, that I bought for my workbench upgrade, on my saw horses. This morning I had some time scheduled to start on these bigger slabs, and when I looked at my saw horses, I just wasn’t sure I would get the results I […]