Page 2 of the fine woodworking archive.

Saw vise update

Posted by is9582 on March 22, 2016 with No Commentsas , , , , , , , , , , , , ,

I made my version of a saw vise with which to sharpen my hand saws, a little over a year ago. I’d picked some oak out of my “shorts” bin, that I could use to make the heads for the front and back legs of the vise. A couple of weeks ago I was in the middle […]

Auriou vs Bailey, hmmm

Posted by is9582 on March 4, 2016 with No Commentsas , , , , , , , , , , , ,

Not long ago I was shifting from flattening the face side of my massive Soft Maple boards (8 1/2″ W x 3 3/4″ D x 75″ L), to one of the edge faces. On one board both of the edge faces were about equal in perceived work, as each had some twist and similar nasty […]

Winding Sticks – alternate use

Posted by is9582 on February 19, 2016 with No Commentsas , , , , , , , , ,

I’ve been doing a lot of hand planing lately, with a good portion of that in the “flattening” mode, as opposed to a more general “smoothing” mode. While I was working today, I was checking my progress with a pair of Winding Sticks, and as I used them I wondered if others do the same […]

My Honing Guides

Posted by is9582 on December 26, 2015 with No Commentsas , , , , , , , , , ,

I thought I’d supplement my last blog with just a bit more info, relating to the honing guides I currently own. I’ve had a range over the years, and those in the photo below, are a fair representation of those.     In the photo, the guide listed as 1. This guide is by Veritas, […]

Eclipse-type honing guide

Posted by is9582 on December 25, 2015 with No Commentsas , , , , , , , ,

I know there are lots of woodworkers that have one of the old Eclipse honing guides, or more likely, one of the many variants based on the original Eclipse. I decided I’d provide some details in print, along with a few photos, to help others get the most use from one of these honing guides (photo […]